Originally Posted By Peter J
Originally Posted By Button
The "Coil Over" shock rear suspension I have driven are trailing arm designed units. The rods go from the rear perch forward to the axle. Seems to Me this is much simpler than the SSL unit and I wonder why SSL did not use it.


Talking to Peter Ballard it seems that the SSL design was arranged as it is to give a useful amount of anti roll and anti squat, hence the angled upper links mounted forward of the axle line...


Don't understand how the angled upper links accomplish this. I would think the adjustments of the damper as well as the Spring Rate would control roll and either forward or rear mounted links squat. But remember I am a retired Accountant not Suspension Engineer.


Button