So the brief to myself was to make the top fit without any major mods to the Supersports.
The hardtop came with the LM62 fittings but no body fittings.
The front of the hard top locates onto modified windscreen blades but I didn't want to drill holes or extend my original items so I had to make something that would do the job …
First purchase from Ebay was an industrial sheet metal folder ..£15 bargain.
I found by chance at a car boot for £2 four door push plates that were the required length,width thickness and even colour !!!..the thickness is important so the screws that locate the windscreen frame do not crack the screen.
There is a complicated z bend on the windscreen bracket but the folder managed it with ease.
The made brackets were covered both sides with 4mm neoprene and adjustable catches replaced the oe system.
Its going well !!!!