Click here to return to the home page.
Image of a road.
Who's Online
9 registered (60Yards, Sir Percival, James B W, BertR, JohnS, Neptune, Aeroman, Malcolm T, twotribes), 57 Guests and 14 Spiders online.
Key: Admin, Global Mod, Mod
Latest Photos
Vienna Classic Days
Photos from Thrill on the Hill Prescott
New Sifab radiator and K&N airfilter on 2016 4/4
Pickersleigh 3
Thrill on the Hill
Newest Topics
Erratic Speedometer
by Rob Thornton
19/08/18 07:02 AM
TOTH 2018 - Plus 8 Hill Climb in First ever Plus 8
by norcal_moggirl
19/08/18 12:37 AM
Morgan Dealer Day at Ledgerwood's
by Stringers Best Mate
18/08/18 08:42 PM
Speed bumps
by Ken A
18/08/18 08:12 PM
A London Classic Car Place
by lowebird
18/08/18 06:38 PM
Aero 8 engine turned dash
by Capt Aero
18/08/18 05:16 PM
Does anyone know this M3W? Plate - N 2CYL
by NickCW
18/08/18 03:55 PM
Newest Members
DavidC, Wilfried Derksen, david1956, Joe90, Gareth H
6122 Registered Users
Shout Box

Forum Stats
6,122 Registered Members
33 Forums
32,701 Topics
518,026 Posts

Most users ever online: 341 @ 11/02/18 10:30 PM
Today's Birthdays
Biggles
Topic Options
#516345 - 05/06/18 01:08 PM Transmission tunnel grommets!
Adrian Bott Offline
New to Talk Morgan

Registered: 31/05/18
Posts: 5
Hello there,
I have just bought a 1992 4/4 and am quite amazed to find that there are no transmission tunnel grommets fitted to the numerous inspection hole openings. Can anyone shed some light on this please as it appears none have ever been fitted from the factory? Kind regards, Adrian.

Top
#516346 - 05/06/18 01:24 PM Re: Transmission tunnel grommets! [Re: Adrian Bott]
Hamwich Offline

Talk Morgan Sage

Registered: 28/04/08
Posts: 6203
Loc: Gloucestershire, UK
Originally Posted By Adrian Bott
Hello there,
I have just bought a 1992 4/4 and am quite amazed to find that there are no transmission tunnel grommets fitted to the numerous inspection hole openings. Can anyone shed some light on this please as it appears none have ever been fitted from the factory? Kind regards, Adrian.


I take it you mean the gearbox cover rather than the transmission tunnel? The transmission tunnel doesn't have any inspection holes in it as far as I'm aware, at least mine doesn't.

As for the inspection holes in the gearbox cover, I have only ever seen Gaffa Tape being used to cover them.
_________________________
Tim H.
1986 4/4 VVTi Sport, 2002 LR Defender, 1957 R4 CV, 2005 Ferrari Vipar

Top
#516372 - 05/06/18 06:44 PM Re: Transmission tunnel grommets! [Re: Adrian Bott]
Ray Offline

Talk Morgan Addict

Registered: 05/04/14
Posts: 3594
Loc: Llanelli
There is often a small round metal plate hanging by one selftapper.
_________________________
.+8 Now gone for a 1800 4/4. 1950 series 1 DHC.sold..

Top
#516434 - 05/06/18 10:25 PM Re: Transmission tunnel grommets! [Re: Adrian Bott]
Adrian Bott Offline
New to Talk Morgan

Registered: 31/05/18
Posts: 5
There are 4 apertures but no grommets at all! I can't understand why they haven't been fitted at the factory. Very strange!

Top
#516436 - 05/06/18 10:31 PM Re: Transmission tunnel grommets! [Re: Hamwich]
Adrian Bott Offline
New to Talk Morgan

Registered: 31/05/18
Posts: 5
Thanks Tim, yep gearbox cover. There are 4 apertures that are uncovered. I guess I will get some grommets to fit but there is an oval aperture that the speedo cable comes through. No chance of making a grommet or successfully using 'gaffer' tape in that case. I'll keep trying to figure something out for that one. Thanks again!

Top
#516447 - 05/06/18 11:05 PM Re: Transmission tunnel grommets! [Re: Adrian Bott]
DaveW Offline
Roadster Guru
Member of the Inner Circle

Registered: 11/12/08
Posts: 15742
Loc: South Yorkshire
For a large irregular hole, first cut a piece of neoprene slightly larger than the hole to provide a flange. Cut a suitable hole in the middle. Cut a slot if it needs to be slotted over an existing cable. Place it under the hole. Retain temporarily with masking tape or similar.

Then do the same again for the outside. Line up the slots. Run a thin bead of superglue on the neoprene just inside the hole in the panel. Place the two together and hold until the superglue sets.

Remove the temporary masking tape and you have a grommet.
_________________________
DaveW
2005 Corsa Red Roadster S1
2016 Saffron Yellow (Narrow) Plus 4

Top
#517627 - 14/06/18 04:22 PM Re: Transmission tunnel grommets! [Re: Adrian Bott]
Gambalunga Online   content

Member of the Inner Circle

Registered: 03/09/11
Posts: 10276
Loc: Mandello del Lario, Lake Como,...
I don't know about earlier models but the gearbox cover on the 2012 Plus 4 is an appalling bit of design.

The back of the gearbox cover has the transmission tunnel fitted over it. This means that the leather trim has to be peeled off and the transmission tunnel removed before the gearbox cover can be removed.

The front has a flange folded upwards that makes it impossible to get the cover off (the flange makes it impossible to slide the cover past the heater/radio box). If the flange was folded out from the firewall, in other words part of the firewall not the gearbox cover, the cover could be fitted over it and you could remove the cover without removing the heater/radio box. Apparently in some cars it can only just be forced past bottom of the heater box: not on mine swear

Given that the tail shaft can be accessed from under the car it is difficult to see any need to remove the transmission tunnel unless it has been damaged. In my opinion it should be possible to remove the gearbox cover without disturbing any other components. It is glued to everything with mastic anyway so water should not be a problem frown better still would be some good neoprene strips to form gaskets.
_________________________
Peter


Top
#525926 - 05/08/18 10:04 AM Re: Transmission tunnel grommets! [Re: Adrian Bott]
milligoon Offline
Talk Morgan Expert

Registered: 20/04/14
Posts: 2669
Loc: Dorset, UK
Why would water be an issue unless you regularly roll the car or drive through deep water?

My gearbox is bone dry and clean, the heat shielding on the inside of my gearbox cover, it is bone dry. The heat in the area probably rapidly dries out any splashes. As the floor boards are lower and not sealed from water as far as it is attached to the chassis any water would come through there anyway.

I think it's a bit of a none problem in all reality.
_________________________
Mark - driving
Archie the Old English Sheep Mog...........
2010 Roadster 3.0 V6 (S3) wink

Top

Moderator:  Aeroman, Boshly, Simon