Mine were fitted at the Morgan factory and trust me they don’t get rid of the wind completely.

Gaston would it be possible that you post a picture of your side screen. Then it would be to see how far in your solution the seal is attached to the top and bottom.
It would be interesting to know if there is a difference to the current standard solution of the company.

the problem is that the shape of the sidescreens is not the same btwn cars from 2020,2023.

Thanks a lot Gaston 👍😎

If I understood Gaston correctly, my seal would have to go down a little further

No, he's good down there. You have to check that it sticks well to the rear pillar of the car all the way.

I had to remove the leather seal for it to work well.

Gaston,
I don’t have a rear pillar that I know of - perhaps this is a translation issue( if so, my apologies!!) can you be more specific re the positioning of the additional neoprene seal,please.

Regards from Ireland!

Hello Robbie.
Sorry for the delay in answering your question.
have expressed myself badly

I must Before finally mounting your seals, you must close the door and check that this seal sticks well to the back of the door, otherwise the air will continue to enter. This seal is not necessarily glued to the leather of the side-screen..

You can see it in photo number 2.