Boss kit from Motolita? Assuming you are buying one of them.
To remove the standard factory leather steering wheel, the current one WITHOUT the air bag, is straightforward.
There are 3 screws holding the front pad. The screws are accessed from behind the front pad and there is one screw on each of the spokes.
2 are 3mm hex heads, and one is a large Phillips head.
Unscrew these and the front pad will be free. Be careful to hold the front pad as there is the horn wire is attached to the front pad.
Mark the straightahead position on the shaft so that you refit it in the correct place.
Then loosen but do not remove the 3/4 inch / 19mm nut.
Give the spokes a firm bash and the steering wheel should come free, but not bash you in the face because you have left the nut in place.
Last edited by Wirewheel; 03/09/12 05:10 PM. Reason: Nut size added
