Originally Posted By GerryWal
Put a small temporary mark on the glass to show the position of the screw on the bezel(chrome rim). It can be very awkward to replace the screw when re-fitting if you don't. Gerry.


Nice idea Gerry, I do something similar, by fitting the screw in it's thread finger tight to align the bezel to it's position.
It's also a good time to replace the Screw with a New Stainless screw.
You will also need a 90* screw driver ratchet is preferable like this

http://www.ebay.co.uk/itm/compact-90-deg...n-/251227916286

or this shows how to use a spanner and a screw tip.

http://www.pcarworkshop.com/index.php/993_-_Ignition_Wire_Replacement

When bezel is removed only ONE screw holds the lens in place (at about 20 minutes past the hour) , the other two in the 'forks' are for adjusting the beam do not screw.

Cain

Last edited by Cain; 15/04/14 05:10 AM.
Cain

Wolf Cafe Racer
4/4 Sport