I decided to bend the clips around the Grill to prevent removal by those who may take a liking to them.

I first set the mesh in the 45% Bias direction to match the Grill Mesh and lining up the positions with the three headlamp fixing screws (located by removing the Bezel) used to attache them to the car.

Cleaning the Headlamp Glass is still easy by slipping the corner of the wet Chamois Cloth underneath and moving it across and around. An old Toothbrush does the grill if needed.

I hope this helps

Frank







http://franks4x4-solograndetour.blogspot.co.uk/
Combat Stress-http://www.justgiving.com/Roadster100