This is a sort of failed experiment. I have not entirely given up but the blade does not wipe as well as the Robbie's system which works perfectly. I think the spring loaded back shell is putting too much force on the tips and the blade is not going completely straight on the flat glass.

Attached Images
20150929_113554_resized.jpg (324.46 KB, 390 downloads)
This shows the blade dismantled
20150929_115937_resized.jpg (160.74 KB, 376 downloads)
Cut to length and with the sections holding the "claws" waiting to be epoxied in place.
20151001_093937_resized.jpg (155.3 KB, 374 downloads)
The finished shortened blade. Note that the back shell is spring loaded in the middle and that the blade comes straight under pressure of the wiper arm.
20151001_104109_resized.jpg (88.44 KB, 374 downloads)
On the car. Robbie's blade is in the middle. The stainless looks good but there is not enough pressure on the centre section to hold the rubber straight.

Peter

[Linked Image]