Spark plugs
Exhaust bobbins
zip ties
#2 Philips and regular screwdriver
English and metric sockets
1/2" open wrench for exhaust manifold bolts
hammer
electrical and duct tape
bungee cords
rags and mechanics gloves
glass cleaner
loctite
wire stripper
Allen wrenches
LED flash light
AAA card and credit card
1 qt oil
I'm not going to mess with flats on the road. That deserves a tow. If the rear goes you won't be able to get to it anyway. The cambelt cover spacers are doing well. If you think you need to carry a new belt you will also need to carry 3 3/16 diameter shafts about two inches long to lock the cams in position to put the belt on as well as a printed set of instructions to do so. Been there done that.
Watch the bobbins on the rectifier. They fail too. One can also use them in a pinch to fix a sheered exhaust bobbin. Same size
