Post Photobucket Re-Boot from December 2013.
I managed to get some time in the garage today.
First I fitted the skids to the exhaust. No real reason for this except that it tidies things up and stops the crud accumulating on the mountings.
Rear:
Front:
Next the windstop. I decided to upgrade the brackets on the Roadster with 2mm aluminium, and at the same time make some for Bumble. I used up some offcuts so the second pair are slightly smaller. It takes a while and a good deal of work to get to this stage:
Then cut the holes:
Old on the left, new on the right. I've modified the dimensions slightly.
Smaller pair for Bumble:
Adding U section neoprene edging:
Test fit:
Thankfully these brackets work with the smaller head restraints!
Completed:
