Originally Posted by Uther
Originally Posted by Richard Wood
Even MMC do that.

[Linked Image]



They didn’t on mine😂 - but yup it works , they have still not quite applied it correctly though. It should as one continuous bead of paste if applied correctly, that cracks if there is looseness.
Morgan have in that pic have simply drawn on both bits, every half turn loose and it will still look tight. - Slack


I think MMC just mark to show its been tightened on build, they have no interest or way of checking it stays that way in use. Ive used Tippex and it works well.

Steve
2008 4/4 1.8 Duratec