Thank you.. I suppose its the one good thing coming out of not being able to get out to work..plenty of polishing time!
I won't tell you just how much swearing went on trying to get that copper fuel pipe to be the right shape! made more difficult in it being one piece until half way down the chassis!
Just finished putting the stub axles back on, they were on the wrong sides..left and right hand thread so they tighten rather than undo... they were the other way round. While i was at it I Magnafluxed the spindles and shimmed the king pins to the recommended .004 clearance.. keeps me out of trouble.. now need to await a post virus road test!
