A solution is available for those who have nightmares about broken chassis tubes on the older M3W.
As I mentioned previously, our car underwent a chassis upgrade at M3W Services, along with several other improvements.
The results are shown in the attached pictures, which I received today.
It shows how the old chassis got reinforced with stronger tubes inside the old tubes.
As you can see, there is a massive difference in wall thickness compared to the old tubes.
These thicker tubes are pressed inside as far as the white/silver line on one of the pictures.
Both the upper and the lower tubes got these inserts.
Once there, they are welded to the old chassis tubes in different places.
The bolt-in A frame is also reinforced and welded into the chassis.
Once all is done, you can't see any difference on the outside of the chassis.
It all looks like the original, only much stronger.
![[Linked Image]](http://tm-img.com/images/2024/05/12/Steve-4.jpeg)
![[Linked Image]](http://tm-img.com/images/2024/05/12/Steve-369f55f13b5fd5743.jpeg)
![[Linked Image]](http://tm-img.com/images/2024/05/12/Steve-3.jpeg)
![[Linked Image]](http://tm-img.com/images/2024/05/12/Steve-1.jpeg)
![[Linked Image]](http://tm-img.com/images/2024/05/12/Steve-2.jpeg)