This speed sensor is a direct replacement for MMC part numbers E340022 & E340110 as fitted to the M3W (2012 – 2020) which appear to have been discontinued by MMC.
![[Linked Image]](https://tm-img.com/images/2024/12/22/Photo-6--Bunny-short-speed-sensor-showing-kit.jpeg)
It uses the same components as the original so is a direct swap. It comes with a replacement stainless steel mounting screw and shake-proof washer.
The clearance between the sensor head and the trigger should be in the region of 0.3mm to 2.3mm. Some cars do not have enough clearance so I’m including a spacer washer to slightly increase the clearance if necessary.
The price for this sensor kit is £70 including UK postage, which is around a 30% discount compared to the MMC price.
Also available is a ‘long-lead’ version which has a 1 metre lead that allows the connector to be relocated inboard (just in front of the oil tank) thus avoiding the majority of water & road dirt that otherwise could hit the connector. Looks neater too!
The price for the long-lead version is £90
Please see this
THREAD which contains some more detail.
Please note that these are NOT compatible with E221002 as fitted to a few late production cars. This later type can be identified by the fact that they don't have a flying lead, the vehicle loom plugging directly into the sensor body.
