Richard / John
I think I expressed myself incorrectly. It's probably my English again. But thank you very much for your help.

I had my PlusFour at my dealer just before winter. A few minor things were done under warranty. During this work, the Morgenpark center console also had to be removed. The Morgan was brought back to me by the dealer on a trailer and then went straight into the winter garage.
When I took the PlusFour out of the garage again two weeks ago, I noticed that the Morganpark center console was loose. It is screwed to the handbrake frame with an M5 screw. I tried to tighten this screw again ... without success. I thought the thread of the nut was under the frame. It took me quite a while to realize that it wasn't the thread that was broken, but that the dealer had used an M5x40 bolt and it was too short. The simplest things take the longest to find. The M5x40 has just gripped in the first thread and the nut under the frame bounces. So you have the feeling that the thread is defective.
I tested an M5x50 and it was too long. M5x45 fits perfectly.
Here are two pictures for a better understanding


[Linked Image]
[Linked Image]

Clemens

PlusFour Red Baron MY 2022