|
|
|
|
|
|
|
|
Sold
by simon8201 - 09/09/26 01:46 PM
|
|
|
|
|
|
|
|
|
|
Wales
by Joske Vermeule, September 1
|
|
|
|
|
|
|
Forums39
Topics49,896
Posts838,002
Members9,635
| |
Most Online1,063
Jun 14th, 2026
|
|
|
|
Joined: Mar 2017
Posts: 2,274 Likes: 41
Talk Morgan Expert
|
Talk Morgan Expert
Joined: Mar 2017
Posts: 2,274 Likes: 41 |
Craig Jezz
|
|
|
|
|
Joined: Sep 2022
Posts: 32 Likes: 3
Just Getting Started
|
|
Just Getting Started
Joined: Sep 2022
Posts: 32 Likes: 3 |
I replaced my wiper blades for new from Melvyn Rutter Ltd.
Two * 7" and one * 6"
Will test out this weekend.
Previous originals were struggling.
Roadster V6 3.0L 2005
|
|
|
|
|
Joined: Jun 2019
Posts: 809 Likes: 59
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Jun 2019
Posts: 809 Likes: 59 |
I got the first leaf spring back in today. Compared to what saw online I put the U-bolts on first, though I left them a little loose for now. Then I attached the fronts. Finally the rear with 2 helpers. I rigged up a strap around the end of the springs and a board as a lever. Then had one helper stand on it to pull the leaf springs down adjusting the link as it came down to avoid the wires. I had 2 washers between the link and the body, so I glued them together. I held them in place while the other helper worked the bolt in. Hopefully I can get the other side together tomorrow. ![[Linked Image]](https://www.tm-img.com/images/2023/03/18/PXL_20230317_220136587.jpeg) ![[Linked Image]](https://www.tm-img.com/images/2023/03/18/PXL_20230317_220125405.MP.jpeg)
|
|
|
|
|
Joined: Jul 2007
Posts: 27,838 Likes: 763
Member of the Inner Circle
|
|
Member of the Inner Circle
Joined: Jul 2007
Posts: 27,838 Likes: 763 |
Well done that seems a clever way to get there.
JohnV6
2022 CX Plus Four
2025 Renault Scenic Alpine etech "Yvette"
|
|
|
|
|
Joined: Jun 2019
Posts: 809 Likes: 59
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Jun 2019
Posts: 809 Likes: 59 |
This worked out very well, and should work as well for the other side.
|
|
|
|
|
Joined: Oct 2019
Posts: 5,595 Likes: 614
Charter Member
|
|
Charter Member
Joined: Oct 2019
Posts: 5,595 Likes: 614 |
Just loaded her up for the trip down to Cranfield for the new hood. Got a definite 'and what do you think you're doing with my car!' from the Petrolhead Cat 😄 ![[Linked Image]](https://www.tm-img.com/images/2023/03/19/20230318_155827.jpeg) K
|
|
|
|
|
Joined: Jul 2007
Posts: 27,838 Likes: 763
Member of the Inner Circle
|
|
Member of the Inner Circle
Joined: Jul 2007
Posts: 27,838 Likes: 763 |
I'm at AWs on Tuesday. I'll keep an eye out
JohnV6
2022 CX Plus Four
2025 Renault Scenic Alpine etech "Yvette"
|
|
|
|
|
Joined: Oct 2019
Posts: 5,595 Likes: 614
Charter Member
|
|
Charter Member
Joined: Oct 2019
Posts: 5,595 Likes: 614 |
Due to drop it off at opening time on Wednesday ... from here that means heading off tomorrow to get part way. If I make really good time I might try and get them to let me drop it off Tuesday before closing ... worth a try.
K
|
|
|
|
|
Joined: Nov 2011
Posts: 7,342 Likes: 49
Talk Morgan Guru
|
|
Talk Morgan Guru
Joined: Nov 2011
Posts: 7,342 Likes: 49 |
I got the first leaf spring back in today. Compared to what saw online I put the U-bolts on first, though I left them a little loose for now. Then I attached the fronts. Finally the rear with 2 helpers. I rigged up a strap around the end of the springs and a board as a lever. Then had one helper stand on it to pull the leaf springs down adjusting the link as it came down to avoid the wires. I had 2 washers between the link and the body, so I glued them together. I held them in place while the other helper worked the bolt in. Hopefully I can get the other side together tomorrow.
Nice Work....
A Morgan Identified Fastidious Owner...
2011 4/4 Bespoke, 1981 Delorean, Auburn Boat Tail
|
|
|
|
|
Joined: Jun 2019
Posts: 809 Likes: 59
Talk Morgan Regular
|
|
Talk Morgan Regular
Joined: Jun 2019
Posts: 809 Likes: 59 |
Thanks! I'd like to say it was easy, but it was far from it. I think the order is the key. And getting the nuts on the U-bolts is good to do while there is still plenty of room. Finish tightening them when everything else is complete.
One question I have, I've read that I should torque the U-bolts nuts to 30 ft lbs. I only have a conventional torque wrench that I would normally put a socket on, but that won't fit between the chassis and the springs. Any suggestions?
|
|
|
|
|
