I had a cvh 4/4 4 seater. The original engine had a turbo added as the previous owner had taken the car to Russia and back and wanted more performance. Unfortunately the addition was poorly conducted, as were most of the ‘repairs’
Tge cvh engine was scrapped as it was not salvageable
I decided to fit a 1.6 ford zetec sigma engine as that was the engine mmc weee using at the time
A custom bellhousing was used to adapt it to the type nine box.
The chassis was in poor state and has been replaced
Throttle bodies from a gsxr600 bike have been added and a straight pipe made
Finally the body was adapted to a two seater and the lights etc have been backdated to be reminiscent of a series v (which had the high cowl body)
New engine mounts made New exhaust and cut down tubular manifold The car ecu will work with factory inlet or aftermarket ecu for itbs New bellhousing Zetec se to type 9 Retain Zetec se clutch and spigot
![[Linked Image]](https://www.talkmorgan.com/gallery/27/full/42483.jpg)
