As posted last week I decided to experiment with a rear mudguard for the M3W coffee

I bought a plastic trailer mudguard for a 15" wheel - a full radius type (rather than half a hexagon type)

Taking off the ally plate the "new" guard was fitted using the same fixing holes and bolts.The guard fitted in a perfect radius round the wheel and met the rear chassis bang on the base area - fixed with two Hex head wood screws to the ash.

Its works a treat - as the test drive yesterday demonstrated. happy3

U just need a slight mod round the drive belt area and to allow
for suspension travel.

This will stop the seat belt issue - forces road debris/water etc downwards, not into the transmission area and stops debris being thrown up into the covered boot area. innocent

so bingo!An easy mod - which could be simply reversed to original if necessary. cheers



Last edited by m3boy; 09/12/12 07:49 PM.
Neil