I bought some 3M film and fitted it myself. Not too difficult if you are patient. Very easy to remove with a hairdryer and renew if necessary.
Highly recommended.
Neil
+1,
Brought on eBay, created templates using graph paper stuck together with masking tape and carefully marked, then join the dots and cut out and checked for fit, transfered to 3m and cut out. Then fitted to front and rear wings, works a treat, have on front wing in one section and smaller section around indicator with small gap between the two, tried a one piece but I found curves too much to get a no wrinkle finish. A professional might do it. Cost about £60.
PS Neil I still have your scrapper on my bench.
