Hello, I'm trying to cure a lack of dipped headlamps on my S1. As I had the wings off for it's annual service I tested the voltage at the connectors on both sides and it's good. Also tested bulbs and they're both good. Then noticed that on main beam dipped lights come on (normal?). However no lights when stalk is in dipped position.
Reading some forums on E39 BMWs they appear to sometimes have lighting issues that are connected to the LCM, lighting control module. Does anyone know if this same LCM is installed on the S1 Aero and if so where?
On the good news front whilst wings were off I also took the opportunity to remove the front underfloor and replace the very tired and original starter motor. She now starts again first push of the button without any dreaded clicks.
Cheers
