I have repaired 4 separate small chips on my cars before using a kit from halfords. The tip is to drill, yes drill the centre of the chip to release the pressure, and then to use the glue as directed. Drilling is done by using a tiny drill bit and using your fingers twist the bit to make a hole in the front piece of laminated glass. Be very careful and take your time.
Do the drilling sooner rather than later or you may find the chip becomes a crack. The worst you can do is to cause a crack and you have to get the windscreen replaced anyway.
Ian 2011 Plus 4 Wild Mogs Reims 2019, Goodwood 2018, Isle of Man 2017, Carried on to Caramulo" 2016
|