All, Yes it's come out a lot better than I thought it would, thanks for the kind comments.
Lowbird, Exbiker,
I doubt that you will be able to fit a pre-gdi cover as, from the web I think that the oil filler cap is in a different position.
However I don't see why you can't fit a Focus etc gdi cover with some mods. You probably don't realise how much I've cut off the cover I have to make it fit.
Also I suspect that, as with the pre-gdi engine the gdi engine will have the "bolts with studs on" holding the cam box down. These studs are used to hold the fixings for the engine cover making the fitting quite easy.
I would suggest you need to look at the gdi engine in a Ford car to see just what the differences (in the cam box area) from the Morgan are, if any. Although 2 litre petrol engined cars are not over common in the UK so you'll have to look quite hard.
Cheers
John
