My 2007 +4 has seat belt retraction problems, so I decided to get them replaced.
However Morgan have no stock left of the belts and will not be getting any new stock. It apparently is due to Homologation issues!
They have stock of the current build seat belts but they have never fitted those to older cars and believe a lot of mods would be required.
I am not sure when the change was made to the current belt design but it could be at late as 2012.
I am going to use a seat belt repair company (via Allon White) for mine, this post is just a heads up if you need to replace in the future.
Do get someone to check the plastic guide, just forward of the inertia reel. These are very challenging to reach, but worth checking.
One of mine cracked, initially the belt was slow to retract and then eventually jammed.
The belt operates fine without this particular guide and once removed the retraction was back to normal.
