Today was the big day.
How to change the rubber bushes on the LT77 gearbox
New type of door stays:
Taken the seats and carpets out:
The propshaft tunnel out:
There are 2 screws from the gearbox cover under the propshaft tunnel:
The handbrake had to be removed:
The new polyurathane bushes in place (I had to ad 2 washers to increase their height:
Refitting the handbrake:
Job done!
[img]
https://farm2.staticflickr.com/1871/43653262404_852041597d_h.jpg[/img]
These caused the problem:
[img]
https://farm2.staticflickr.com/1872/30502691458_3c90bb8cd3_c.jpg[/img]
Changing gears is razor sharp again!
