Originally Posted by Gwyn D
I appreciate this an old post but I’m about to change the perished bushes for polyurethane bushes on my Morgan +4 T16 (1996). Everything is exposed and I’m ready to go but I was just wondering are there any factory torque settings for the bolts associated with the bushes.
Any advice gratefully received.

Best

Gwyn

I would have expected the bushes would have metal inserts that securing bolts tighten against, making bush material irrelevant to bolt torque. Assuming this is the case just nip up tight as suggested above.


Richard

2018 Roadster 3.7
1966 Land Rover S2a 88
2024 Royal Enfield Guerrilla 450
1945 Guzzi Airone