I did it too crazy2

The wiper blades WBS8 fit pretty well

I recorded a video in slow motion with the unmodified wiper blades.

Video

The wiper blades have slightly different paths on the way there and back (about 3-5 mm). On the way back they touch the upper edge of the windshield (visible in the video). But only the rubber touches the metal frame.
At the very end of the video you can also see that the right wiper, seen from the front, touches the metal frame on the right a bit more.

[Linked Image]

To reduce this I made the same modification as CooperMan. But the result is a stronger touch at the metal frame below. I have now mounted the wiper blades unmodified and will try to shorten the right wiper blade a bit. Then it should fit.

The wiping behaviour is significantly better than with the original wiper blades (no rattling at all).

I'm curious about the first test in the rain. gloomy

From my point of view this is a very recommendable (and not very expensive) modification.

Many thanks CooperMan thumbs

Michael
2018 Plus 4 Sport