Thank you for the idea with the steering column cowl. I just found in your ten years old thread.

The plastic edge on my 2019 Plus 4 is rather on the cheap side. I found a profile which is made for protecting car doors. It can be cut by strong scissors.
It fits nicely around cowl, but still leaves an open part, where the cowl is too thick.

Any other ideas?

[Linked Image]cowl1 by Werni Wehrli, auf Flickr

[Linked Image]cowl2 by Werni Wehrli, auf Flickr

Plus 4 110 Edition 2019