I have it and it does reduce the noise, but to be honest i sealed the bulkhead and dynamated everything to reduce the noise. I left the tubing from the new fill tube in a position that allowed me to blow into it to burp the oil into the bb thus speeding up the fill process. I used Royal Purple 75-140wt.

I will post photos as soon as i get off the phone.

[Linked Image]

This attaches to the BB red vent instead of it.
[Linked Image]

[Linked Image]


This is the new fill point and vent.
[Linked Image]


This is the BB temperature with a passenger after running up a mountain chasing an Ace.
[Linked Image]



Last edited by LightSpeed; 10/11/19 08:31 PM. Reason: adding photos
The light at the end of the tunnel is actually a train. 2019 M3W