Originally Posted by LightSpeed
Originally Posted by TimG
If you want to sit a little higher consider an AirHawk cushion https://www.motohaus.com/airhawk-seat-cushions.html How much higher depends on how much you pump it up but too much & it would be bouncy, normal would be 30 - 50mm. I had one from my scooter but lost it when I left it on the tonneau of my vintage car. If you want to reorientate you wheel spokes no need to drill new holes, disconnect the column under the cowl at the joint & turn the upper column 180deg.


I moved the wheel 180 degrees the second day of ownership, but it is not the spokes as much as the rim of the wheel that artfully blocks the tachometer.

I will try lifts of various heights. I believe I have an old Physicians Desk Reference that might be thick enough😊


I tried various heights and the only thing that seems to work without major spinal surgery is leaning over to the right/center and peering around the wheel when shifting. I tried various cushions raising the height and all it seems to do is block the view even more.
I know there are several other drivers who are in the 5'6" range so how much of the tachometer do they see?
[Linked Image]

I am about ready to try and install an electronic tach mounted in a better location.



Last edited by LightSpeed; 23/11/19 04:47 PM.
2019 M3W Sold and is now in Las Vegas enjoying the showgirls :-)