Decided to sort out the loose tank this afternoon. Couldn’t for the life of me see how the rear of the tank decking is supposed to be fixed to the chassis or if something was missing or not. I even wondered if it was intentionally loose maybe to prevent any chassis twist stressing the tank. Anyway I did fix it in the end but it turned out to be a bit of a bodge job.
Made up two little kinked steel fingers and bolted them to the decking brackets. They just touch on the rear cross member (one either side) to stop the decking and tank flipping up. Hopefully they will still allow for a bit of chassis twist to minimize any stress transfer.
Befor and after
![[Linked Image]](https://dl.dropboxusercontent.com/s/zfrmgouc7ytegf4/tank1.jpg)
