The header tank is fixed on its front corner with two screws to a plate on the heater box. It is also plugged over a metal clamp, but very oblique/skew. See picture 2.
It does not touch the windscreen wiper motor, but flies about 1cm above it.

This fixing on only two sides makes it quite wobbly and shaky. I am afraid, that the header tank bangs against the wiper motor and may loose its hose clamps or even break.

Is it supposed for the header tank to sit directly on the wiper motor? Shall i bridge the gap with a piece of rubber or neoprene?

2019 Morgan Plus4 12'000km

[Linked Image]IMG_3999 by Werni Wehrli, auf Flickr

[Linked Image]IMG_3997 by Werni Wehrli, auf Flickr








Last edited by SwissMogFan; 26/05/21 01:12 PM.
Plus 4 110 Edition 2019