I thought I'd share a few images of my solution for an updated "dashboard" for the oil pressure / temp gauge and the new GPS Speedometer / Odometer. The structure is three pieces of 1/4 hardboard "hinged with duct tape. The front has 1/4 closed cell foam, then leather stretched over all. The biggest challenge was trying to match the interior color, which I got close, but you'll notice it is less than perfect. The box wedges between the chassis members and trim piece around the shifter and the sides fold back and have zip ties across the back holding them in place, and the control button for each gauge on on the respective sides. It will be interesting to see how accurate the GPS Speedo / Odo are.
[img]https://www.tm-img.com/image/xmEDC[/img]
[img]https://www.tm-img.com/image/xmnfK[/img]
[img]https://www.tm-img.com/image/xmsIg[/img]
[img]https://www.tm-img.com/image/xml1a[/img]
[img]https://www.tm-img.com/image/xm0B6[/img]
[img]https://www.tm-img.com/image/xmvuN[/img]
[img]https://www.tm-img.com/image/xmIAR[/img]
[img]https://www.tm-img.com/image/xmhzq[/img]
[img]https://www.tm-img.com/image/xmmIh[/img]

2016 M3W