Morning All and Happy Sunday,
Have recently fitted some round door mirrors to my 4/4.
Driver’s side fine but passenger side is impossible to adjust to give a view of near side. I have received feedback from others stating they have had a similar issue. As there are several manufacturers who produce these perhaps it is a problem unique to my product.
Anyway, my question is, my friendly RAC neighbour suggested bending the arm to achieve the correct position but to check with others ergo will it snap etc. Any advice gratefully received.
Kingy
On our Roadster the nearside mirror arm is much more upright than the offside, this allows the round mirror to be adjusted to give a perfect view down the nearside of the car from the drivers seat. As DaveW states the mirror arm should rotate at the knuckle where the arm meets the door attachment. I suspect there is a spring that holds the arm in the specific positions. I would post a picture, but haven't mastered that art on here yet. Anyway, hope this helps.
Dave
