Thanks Jon, as you say can quite clearly see the dual springs. I believe you fitted the fronts yourself, did you also fit the rears yourself? Have you left ride height the same as standard? That's my plan.
Best rgds, Ashley
Just to add a recent post on the subject of fitting the rear SSL coilovers
here Ashley. As said it couldn't be easier unlike the fronts which although not difficult, does involve a lengthy process taking most of a day in my case.
Mine were fitted as supplied for both damping and seat height which can be seen below (you could count the threads exposed to match the latter).
![[Linked Image]](https://i.imgur.com/XYguLx8.jpg)
Other than increasing damping a couple of clicks when touring I've never felt the need to change anything and have never had any ground clearance issues at the rear. To be fair Dan at SSL did ask me for OE dimensions loaded and unloaded so not too surprising his replacements were set to match on fitting.
