Do you have painted wires ? I have found that if the paint is in the way of the wheel nut it can stop it tightening fully & give play. Make sure themating areas are clean before you refit the wheel.
Hello John,
Yes, there where the standard silver painted wheels. When I remember right they are free of colour in the small area where the nut is running to center it together (I think very bad english). But I fit them as MWS (the wheel company) tells in their manual. Allways with some grease.
So now, in summary, there are some good points for an easy check and if the problem is caused there also an easy DIY repair.
Now, I only need the correct torque for the axle nut. When possible in NM.
Greets René
