Originally Posted by Mark+4
Hi Rog,

Is the stop something that can be adjusted by me, or is it set when the switch is manufactured? and hence why I need a new switch.

Have been looking at new switches and it also looks like I need to know if the current switch is "Make" or "Break" before make, does anyone know which it is.

Thanks


Yes you can adjust the stop. It’s the little tab here that you poke in the appropriate hole.

[Linked Image]

My switch looks to be a Lorin and here's the data sheet. There are lots of other options here.

I’m sure the electrical wizards will confirm, but perhaps if you used a 3 pole 4 way, you could use all the pole contacts and maybe have triple the 1A @ 24V per contact current rating? Depending on your new fan load, you might save yourself a relay?

For reference, here’s the back of mine.
[Linked Image]

Last edited by Rog; 29/02/24 11:46 AM.
Roger
2011 Plus 4