I believe they are the same. I used tie wraps to bet a better fixing of the rod.
On one side of my car it came off really easily the other less so . But to get to hadle etc you only need to take out the bottom half.
the pictures are of doors minus the cards. The bottom comes off by removing the screws under the door & the screw in the handle. There is then push fit connector into a metal bracket, you can see it in pic 3 on the bottom right. You probably can do it with this still attached.

[Linked Image]
[Linked Image]
[Linked Image]
[Linked Image]


JohnV6
2022 CX Plus Four
2025 Renault Scenic Alpine etech "Yvette"