Old Book
by Morganmike - 21/09/26 07:54 PM
|
|
|
|
|
|
|
Goodwood
by waikiore - 19/09/26 02:50 PM
|
|
|
|
|
|
|
Forums39
Topics49,932
Posts838,509
Members9,638
| |
Most Online1,063
Jun 14th, 2026
|
|
|
|
Joined: Dec 2008
Posts: 22,385 Likes: 358
Roadster Guru Member of the Inner Circle
|
OP
Roadster Guru Member of the Inner Circle
Joined: Dec 2008
Posts: 22,385 Likes: 358 |
I managed to get some time in the garage today. First I fitted the skids to the exhaust. No real reason for this except that it tidies things up and stops the crud accumulating on the mountings. Rear:  Front:  Next the windstop. I decided to upgrade the brackets on the Roadster with 2mm aluminium, and at the same time make some for Bumble. I used up some offcuts so the second pair are slightly smaller. It takes a while and a good deal of work to get to this stage:  Then cut the holes:   Old on the left, new on the right. I've modified the dimensions slightly.  Smaller pair for Bumble:  Adding U section neoprene edging:  Test fit: Thankfully these brackets work with the smaller head restraints!   Completed:  
DaveW
'05 Red Roadster S1
'16 Yellow (Not the only) Narrow AR GDI Plus 4
|
|
|
|
|
Joined: Feb 2012
Posts: 5,661 Likes: 10
Charter Member
|
|
Charter Member
Joined: Feb 2012
Posts: 5,661 Likes: 10 |
Good job Dave, very neat solution.
Martin (Deano)
|
|
|
|
|
Joined: Jan 2012
Posts: 14,976 Likes: 2
Member of the Inner Circle
|
|
Member of the Inner Circle
Joined: Jan 2012
Posts: 14,976 Likes: 2 |
Richard
1976 4/4 4 Seater
|
|
|
|
|
Joined: Jan 2007
Posts: 3,482 Likes: 42
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Jan 2007
Posts: 3,482 Likes: 42 |
Dave,
A) do the seat belts run ok with this in place?
B) could you pm me the spec of the Perspex and the suppliers details please
Cheers!
Robbie
2021 Plus Four -- Helga
211-WX-1433
"Fettlebodge"--A chief of the PaddyMogs
|
|
|
|
|
Joined: Dec 2008
Posts: 22,385 Likes: 358
Roadster Guru Member of the Inner Circle
|
|
OP
Roadster Guru Member of the Inner Circle
Joined: Dec 2008
Posts: 22,385 Likes: 358 |
Robbie Yes, belts work OK. Sourced from The Plastic Man (who else!)Same place as my spare wheel filler comes from. http://www.theplasticman.co.uk/index.php?area=calculatorFor the draft stop - Polycarbonate (unbreakable). You spec the whole thing, including radius of corners, I also have polished edges, and spec the holes, because they drill super clean holes. I need to dig out the measurements from the garage so I'll post them later......... You now have a PM packed with dimensions! 
DaveW
'05 Red Roadster S1
'16 Yellow (Not the only) Narrow AR GDI Plus 4
|
|
|
|
|
Joined: Jan 2007
Posts: 3,482 Likes: 42
Talk Morgan Addict
|
|
Talk Morgan Addict
Joined: Jan 2007
Posts: 3,482 Likes: 42 |
Robbie
2021 Plus Four -- Helga
211-WX-1433
"Fettlebodge"--A chief of the PaddyMogs
|
|
|
|
|
Joined: Dec 2008
Posts: 22,385 Likes: 358
Roadster Guru Member of the Inner Circle
|
|
OP
Roadster Guru Member of the Inner Circle
Joined: Dec 2008
Posts: 22,385 Likes: 358 |
Post Photobucket Re-Boot from December 2013. I managed to get some time in the garage today. First I fitted the skids to the exhaust. No real reason for this except that it tidies things up and stops the crud accumulating on the mountings. Rear:  Front:  Next the windstop. I decided to upgrade the brackets on the Roadster with 2mm aluminium, and at the same time make some for Bumble. I used up some offcuts so the second pair are slightly smaller. It takes a while and a good deal of work to get to this stage:  Then cut the holes:   Old on the left, new on the right. I've modified the dimensions slightly.  Smaller pair for Bumble:  Adding U section neoprene edging:  Test fit: Thankfully these brackets work with the smaller head restraints!   Completed:  
DaveW
'05 Red Roadster S1
'16 Yellow (Not the only) Narrow AR GDI Plus 4
|
|
|
|
|
Joined: Mar 2017
Posts: 2,274 Likes: 41
Talk Morgan Expert
|
|
Talk Morgan Expert
Joined: Mar 2017
Posts: 2,274 Likes: 41 |
Craig Jezz
|
|
|
|
|
Joined: Aug 2013
Posts: 15,794 Likes: 15
Formerly known as Aldermog Member of the Inner Circle
|
|
Formerly known as Aldermog Member of the Inner Circle
Joined: Aug 2013
Posts: 15,794 Likes: 15 |
That is a great example of lateral thinking...well done!
Peter,
66, 2016 Porsche Boxster S
No longer driving Tarka, the 2014 Plus 8...
|
|
|
|
|
Joined: Oct 2012
Posts: 6,538
Talk Morgan Sage
|
|
Talk Morgan Sage
Joined: Oct 2012
Posts: 6,538 |
More great work from the Wellings Catalogue!
Well done Dave - you really could start a business!
Neil
|
|
|
|
|
