9 members (John V6, DMC1904, JD44, Sloany, TomS, +8Rich, Grumpy2, MDS61, MJF),
309
guests, and
43
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums34
Topics48,364
Posts813,337
Members9,215
|
Most Online1,046 Aug 24th, 2023
|
|
There are no members with birthdays on this day. |
|
|
Joined: Feb 2013
Posts: 425
Learner Plates Off!
|
OP
Learner Plates Off!
Joined: Feb 2013
Posts: 425 |
Could I draw upon your collective wisdom and ask you if would it be possible to attach the Ctek with its tiny ring terminals permanently and safely to the starter battery without cutting the original cable and installing a new terminal. I've seen something called a "KnuKonceptz" terminal which would be ideal but not available in the UK. I've thought of soldering the Ctek connector directly to large washer but that seems to be somewhat naff.
John 2015 Plus 4 (GDI) Sport Green
|
|
|
|
Joined: Dec 2017
Posts: 2,041 Likes: 71
Talk Morgan Expert
|
Talk Morgan Expert
Joined: Dec 2017
Posts: 2,041 Likes: 71 |
On all my Moggies I have attached the Ctek cables to the tightening nuts of the battery terminal clamps using the Ctek ring terminals, then ran the cable under the shelf and around edge of carpet so it can be easily connected to the charger. I suppose it depends on what battery terminals you have but changing the ring connectors would not be difficult at all.
Bruce 1964 4/4 Series V Comp (Megan) 1994 +8 (Maurice) 2013 M3W (Olga)
|
|
|
|
Joined: Dec 2008
Posts: 21,871 Likes: 168
Roadster Guru Member of the Inner Circle
|
Roadster Guru Member of the Inner Circle
Joined: Dec 2008
Posts: 21,871 Likes: 168 |
Put an in line fuse in the positive wire, close to the battery, just in case.
DaveW '05 Red Roadster S1 '16 Yellow (Not the only) Narrow AR GDI Plus 4
|
|
|
|
Joined: Dec 2017
Posts: 2,041 Likes: 71
Talk Morgan Expert
|
Talk Morgan Expert
Joined: Dec 2017
Posts: 2,041 Likes: 71 |
Put an in line fuse in the positive wire, close to the battery, just in case. The Ctek unit itself has a cut off for overload, etc.
Bruce 1964 4/4 Series V Comp (Megan) 1994 +8 (Maurice) 2013 M3W (Olga)
|
|
|
|
Joined: May 2017
Posts: 1,530 Likes: 37
Talk Morgan Enthusiast
|
Talk Morgan Enthusiast
Joined: May 2017
Posts: 1,530 Likes: 37 |
I have done exactly as Bruce because I want to keep the Odyssey AGM battery always fairly topped up, the AGM battery requires about 30% of its a/h rating from the charger in the bulk phase so as not to reduce capacity over time . If the car has not been out I put on charge every three weeks, and Dave my Ctek cable has that fuse in it.
99 plus 8 indigo
|
|
|
|
Joined: Nov 2018
Posts: 103
L - Learner Plates On
|
L - Learner Plates On
Joined: Nov 2018
Posts: 103 |
I just plug mine into the cigarette lighter socket, saves all this extra work and works a treat!
Tony
1994 Connaught Green Plus 4
|
|
|
|
Joined: Nov 2011
Posts: 7,068 Likes: 21
Talk Morgan Guru
|
Talk Morgan Guru
Joined: Nov 2011
Posts: 7,068 Likes: 21 |
I just plug mine into the cigarette lighter socket, saves all this extra work and works a treat! Mine has lived on the charger via the cigarette lighter since new with no problems
A Morgan Identified Fastidious Owner... 2011 4/4 Bespoke, 1981 Delorean, Auburn Boat Tail
|
|
|
|
Joined: Feb 2016
Posts: 7,941 Likes: 218
Talk Morgan Guru
|
Talk Morgan Guru
Joined: Feb 2016
Posts: 7,941 Likes: 218 |
Far better to use the supplied ring terminal option direct to battery. Less resistance so charger gets the opportunity to charge within its full voltage control regime. The extra terminal lead option on my Ctek clone is fused within, has non reversible connector and cover for when not in use, when its tooked under carpet.
Richard
2018 Roadster 3.7 1966 Land Rover S2a 88 2024 Royal Enfield Guerrilla 450 1945 Guzzi Airone
|
|
|
|
Joined: May 2013
Posts: 881
Talk Morgan Regular
|
Talk Morgan Regular
Joined: May 2013
Posts: 881 |
On all my Moggies I have attached the Ctek cables to the tightening nuts of the battery terminal clamps using the Ctek ring terminals, then ran the cable under the shelf and around edge of carpet so it can be easily connected to the charger. I suppose it depends on what battery terminals you have but changing the ring connectors would not be difficult at all. I have done the same the battery is now 7 years old and keeps full charge
Very much in the dog house, could be up for rehoming
|
|
|
|
Joined: Apr 2017
Posts: 1,799 Likes: 3
Talk Morgan Enthusiast
|
Talk Morgan Enthusiast
Joined: Apr 2017
Posts: 1,799 Likes: 3 |
Can't remember which model my Ctec is but it came with 2 sets of cables, 1 with crocodile clips for direct to battery connection and 1 with a cigarette lighter plug.
Why not call Ctek and ask them for a solution.
As it happens I always use the cigarette lighter plug on Mog with no problems but I will use the crocodile clips to condition our Freelander's battery before we fire it up again.
Bob
2009 Black Roadster 1999 4/4 2 litre Zetec
|
|
|
|
|