Talk Morgan Forums Morgan Sports Cars Maintenance & Servicing DIY spare wheel spinner

The valve should be either at 12 o'clock or 6 o'clock Craig.

5 o'clock??? sloppy deployment.

And your bar isn't straight either.

The valve should be either at 12 o'clock or 6 o'clock Craig.

5 o'clock??? sloppy deployment.

And your bar isn't straight either.

Think I prefer mine as it is

The valve should be either at 12 o'clock or 6 o'clock Craig.

5 o'clock??? sloppy deployment.

And your bar isn't straight either.

But… If you had one of these you could colour in the logo

I’ve had this spare spinner kicking around for ages along with a desire to somehow use it to replace the tap handle arrangement that clamps my spare.

So I gave it ago this week....


First find a suitable bolt. This Tee bolt was perfect.


Pre tack the bolt in position. Important to get it absolutely centralized and perfectly upright.
Acquire a few tubes of epoxy resin from the local pound shop.


Fill the cavity. Not the prettiest of potting but it did set really hard and glass like. I don’t think the bolt will be detaching any time soon


But if you do find a spare wheel laying by the side of the road it might just be mine