|
|
|
Forums34
Topics48,379
Posts813,563
Members9,215
| |
Most Online1,046
Aug 24th, 2023
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Jul 2007
Posts: 26,770 Likes: 429
Member of the Inner Circle
|
Member of the Inner Circle
Joined: Jul 2007
Posts: 26,770 Likes: 429 |
I would contact Librands first.
JohnV6
2022 CX Plus Four
2025 MG ZS EV aka Trigger
|
|
|
|
|
Joined: Dec 2021
Posts: 6
New to Talk Morgan
|
|
New to Talk Morgan
Joined: Dec 2021
Posts: 6 |
Good idea. Will speak to them on Monday. Coincidentally, now got the dreaded immobilizer issue so struggling to get the car started at all!
|
|
|
|
|
Joined: Dec 2008
Posts: 21,871 Likes: 168
Roadster Guru Member of the Inner Circle
|
Roadster Guru Member of the Inner Circle
Joined: Dec 2008
Posts: 21,871 Likes: 168 |
The immobiliser issue is worse with a leather covered column shroud, which adds distance between the fob and sensor ring..
Make sure that the sensor ring is as far out as possible. I cut away some of the plastic shroud around the key hole so that the ring is a bit further out. The distance is critical and seems worse in cold weather.
But if you swipe the black part of the key flat against the keyhole, the immobiliser light should go off and you get 30 seconds to put the key in and start.
DaveW
'05 Red Roadster S1
'16 Yellow (Not the only) Narrow AR GDI Plus 4
|
|
|
|
|
Joined: Dec 2021
Posts: 6
New to Talk Morgan
|
|
New to Talk Morgan
Joined: Dec 2021
Posts: 6 |
Can fiddle it a bit with the key and get it to start (usually!), but it's not exactly reliable! Sounds like the best solution is to throw it back at Morgan to sort out properly. Don't want to bodge it.
|
|
|
|
|
|
|
