|
|
|
8 members (John Winn, Chad Wilson, Morganmike, Julian BB, DMC1904, Burgundymog, TomS, TBM),
318
guests, and
43
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums34
Topics48,364
Posts813,339
Members9,215
| |
Most Online1,046
Aug 24th, 2023
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Feb 2016
Posts: 7,941 Likes: 218
Talk Morgan Guru
|
Talk Morgan Guru
Joined: Feb 2016
Posts: 7,941 Likes: 218 |
That relay chosen should be fine Crowbar. Also you can ignore Doug's otherwise valid comment as it's not a diode relay and doesn't need to be for your age of car. Battery polarity is irrelevant therefore.
I would disconnect the wire to fog lamps at relay pin 87. Operating your fog lamp switch then you should just hear the relay click. If this is the case you have a short to ground on the live feed to fog lamps. Carefully trace the power feed after relay to find it, maybe disconnecting at fog lamps. FWIW I would suspect issue is in one or other of fog lamps themselves - a continuity tester would reveal. Once sorted replace feed wire to relay pin 87 and change fuse to 15 amp. Do not go above 20 amp!
Richard
2018 Roadster 3.7
1966 Land Rover S2a 88
2024 Royal Enfield Guerrilla 450
1945 Guzzi Airone
|
|
1 member likes this:
Deejay |
|
|
|
|
Joined: Mar 2013
Posts: 410 Likes: 5
Learner Plates Off!
|
|
OP
Learner Plates Off!
Joined: Mar 2013
Posts: 410 Likes: 5 |
Well problem solved! Looks like I was a bit sloppy with the solder blob on the hot contact in one of the lights and it was shorting on the light housing. Redid the connection and now the lights are on with a 10 amp fuse!
Many thanks to all here for the help!
Best,
GC
1965 Plus 4
2008 997 Turbo Cab
1981 Alfa Spider
1954 Austin Healey 100 (SOLD)
2013 M3W (SOLD)
|
|
|
|
|
|
|
