|
|
|
7 members (chanteclair, DavidR, Graham, G4FUJ, MATTMOG, John07, Lordofthewings, John V6),
344
guests, and
41
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
Forums34
Topics48,362
Posts813,319
Members9,215
| |
Most Online1,046
Aug 24th, 2023
|
|
|
There are no members with birthdays on this day. |
|
|
|
Joined: Jul 2007
Posts: 26,758 Likes: 424
Member of the Inner Circle
|
Member of the Inner Circle
Joined: Jul 2007
Posts: 26,758 Likes: 424 |
Mr Mog says oil but I use copper slip. Easy on with a decicated paint brush both top & bottom side after checking the shims for wear. I keep thinking there is a bishop and actress joke in this somewhere. 
JohnV6
2022 CX Plus Four
2025 MG ZS EV aka Trigger
|
|
|
|
|
Joined: Feb 2007
Posts: 511 Likes: 1
Talk Morgan Regular
|
Talk Morgan Regular
Joined: Feb 2007
Posts: 511 Likes: 1 |
My gun has a knurled screwed cover on the end. I am unsure what the function is. Should this be undone and then placed over the nipple and then tightened? I must admit that I never feel confident that my greasing is effective. This knurled end holds the jaws that grip the nipple and should be tight. A good gun will sometimes be difficult to get off the nipple because the jaws hold so tight, it certainly shouldn't need holding on. To get it off just move out of line and this should release it.
Simon
2002 4/4
1936 Austin 12 light 4 Ascot saloon
2023 AMG Mercedes C300e estate
2021 Audi A1 sport
|
|
|
|
|
Joined: Aug 2011
Posts: 7,553 Likes: 88
Talk Morgan Guru
|
|
Talk Morgan Guru
Joined: Aug 2011
Posts: 7,553 Likes: 88 |
Mr Mog says oil but I use copper slip. Easy on with a decicated paint brush both top & bottom side after checking the shims for wear. I keep thinking there is a bishop and actress joke in this somewhere. I use copper slip as well, but never thought of a paint brush. I use workshop rubber gloves! Now there MUST be a joke there! Bud __________ 2003 - 4/4
Bud
4/4 "Stanley"
|
|
|
|
|
Joined: May 2009
Posts: 3,727
Green & Grown Up Talk Morgan Addict
|
|
Green & Grown Up Talk Morgan Addict
Joined: May 2009
Posts: 3,727 |
That kit looks great! Found it on the site (link: remote greasing ), but there are two versions: NS9000MOG. For bearings with inlet thread: 1/4"unf, 1/4"bsf, & M6x1 NS9024MOG. For bearings with inlet thread: 1/8"bsp Anyone know which kit/inlet tread fits a 2011 plus4 sport? My Roadster is 2009 so yours should need the same two kits NS9000MOG - M6/UNF/BSF NS9024MOG - 1/8 BSP I also bought M6 Nuts & Bolts from westfield fasteners. In the kit they supplied the bolts but no nuts & washers so I bought complete sets which I used (for fixing the block to the wing bulkheads) Frank
Last edited by Frank 4x4; 25/05/12 11:30 PM.
|
|
|
|
|
|
|
