To all who addressed the original question asked many many thanks. I wondered what it would take to swop my low leaf spring (on my side carrying 16 stone driver ) over to my passenger high side (carrying 8 stone). Then at least when I get in the car it would looks and ride level. I am told that the springs can be swopped over and are interchangeable but its a big job. Also I am not sure what would be needed in terms of workshop equipmeny. (ie axle stands, jacks etc). Does anybody have a view or a source that describes a leaf spring change process bearing in mind that both springs would have to be off at the same time to facilitate the swop so the good/high spring is under the heavy b*****d (moi). Alternatively a good mechanic in the Oxford area that could do it for me.
You need to try Toni Dwornik. He's based near Horton cum Studley. 07970 861117
There's not much he can't do.
