Originally Posted By sospan
Originally Posted By RoadsterBoy
Excellent post Ashley - thanks.

I bought a Dual action 6 speed polisher. After some practice ( not on the Morgan) soon got the hang of it.

I think it cost £90 with some bits so not expensive.


I bought the DASPro DA machine via an offer in Detailingworld website/forum.
I have Autofiness pads ( 6" and 3") and their polishes. I also have Meguiars Compound and ScratchX. Autofiness Triple is nice too for regular use after washes. Meguiars clay bar is used very occasionally and I am trying their clay mitt out.
I practised with the machine on a fridge and a freezer! Plus a couple of scrap panels.

Ashley......for the Morgan what do you advise for a curvy body as the concave and convex areas are potentially danger areas for overpolishing?



I've been detailing for 5 years now, and Morgan's are by far the most difficult cars I've had to polish! With the DAS Pro machine, you shouldn't have any problems with over-polishing, but remember, if the pad isn't spinning, it's not doing anything! I have 3 machines that I use... a Flex 3401 with 150mm pads, a DAS Pro with 100mm pads and a Rupes Nano with 40mm and 70mm pads. There aren't many areas I can't get into with one of those, but still end up hand polishing certain bits!