Car passed it's CT (MOT) but was advised that one rear brake was binding and not immediately releasing. Living in rural France 2 hours from Morgan dealership wondered if anyone knows if any other car has same rear brake cylinder as Morgan. Have read here that you can use a Transit one which is smaller. but I would prefer to maintain original spec. Have tried' powertrackbrakes.co.uk' but they do not stock 2014 Morgan parts Any good ideas where I can source parts. Thanks
Remove the cylinder, take off the dust covers, remove the pistons, clean them and the bore. Clean with brasso and clean carefully after. Apply a light smear of silicon grease to the seals, box up and test - I’ve never had a problem after although the first time, just after I bought the car the pistons were too rusty for this and I renewed them.
