On my new-to-me 2017 Plus 4 the speedo is way over to the left, away from an easy glance to check one's speed.

So like others I've read about on TM, I thought I would fit a small discreet digital readout on the top of the steering column.

I acquired one with a nice easy-to-read display that simply plugs into the OBD port - and it worked perfectly in my tin-top (2014 Golf GTD). However, plugged into the Morgan, all the functions work except for the speed!

So am I right in assuming that the OBD on the GDI engine setup is not Euro OBD2? The instructions with the display showed a few different wiring protocols that involved changing/removing some of the pins - which I tried, but none of those options worked any better.

I have acquired another, solderable OBD plug - so I could rewire the lead to suit the Mog, if I only knew how (or even whether it's possible!) - ie which pinouts provide the speed sensing and so on.

Any OBD wiring/pinout experts out there, please?

Many thanks if you can help!

Keith
2017 Plus 4, deep blue