Talk Morgan Forums Morgan Sports Cars Morgan Three Wheeler & Super 3 Dan's OFF Topic Boardtrack Racer Pics

Post 3

Also need to fab up a battery box. Made this from scrap 10 ga aluminum I had at home.



Chain guard mounting. I bought a cheap swap meet chain guard and it came with two hole in it and it was chrome. I painted it to match and had to use the two holes and incorporate mounts somehow.







The 2" belt drive was polished aluminium, but didn't look right on the bike. So I painted it Harley textured black. The clutch cover and front pulley cover were also polished aluminium, but I had them chromed and they look much better with the black now.



Here's the somewhat finished side profile. Still have the tail light assembly and the mirrors to install. I say install the mirrors as they are my gauges as well as mirrors. The mirrors have LED's beneath the glass and when on, show through the glass. The left one has the speedo, left turn, hi beam and neutral light. The right mirror has the tach, right turn, low oil and low voltage. About 12 wires with each light to get figured out as well. Then there's the three push buttons on each side by the hand controls, so add another 6 wires per handlebar side to wire in. It's all wiring, not electronics like computers etc, so just figure it out and do it I guess.



Thanks for putting up with me on this thread...

Have a Merry Christmas and a VERY Happy New Year! 2021 has to be better than 2020, right???

Dan