Thanks guys, greatly appreciated.
Just finished up the re-install of the tail light and turn signals. They've been done for 10 years, but just replaced all the old cracked rubber gaskets and converted to LED's. I flattened a 3/8" copper tube to match the arc of the rear fender and bonded it to the inside of the rear fender. That gave me a place to run my four rear wires through without getting them tangled up in the rear tire. Also did my ignition wiring to the coil and buttoned that up last night.
![[Linked Image]](http://pic80.picturetrail.com/VOL846/863774/19566135/414495709.jpg)
![[Linked Image]](http://pic80.picturetrail.com/VOL846/863774/19566135/414495713.jpg)
Thanks again!