This was missing when I found the car (1974 4/4) and I'm assuming that some marine ply-wood with epoxy will suffice - assuming I can get the right thickness.
I noted some older posts out there where people seemed to be creating additional shelves between the battery location and the parcel shelf and I was wondering if anyone has completed a project like this for a 4/4 and has photos and feedback to share on what they did ?
Thanks
I've made three tool trays. The first in plywood, screwed and glued.
The second mainly from a single sheet of aluminium, with sides added and a box to take the difference casing. (Not the best method)
The third was made up of a number of shaped aluminium sections riveted together. This one created the most space, but the plywood version is a much easier build.
